Ed's '91 4Runner Project
Rear Leaf Swap - Front D44 Swap
Rear coil to leaf swap- Spring 2002
(went in with a Superlift 4" front lift kit, see SAS "before" pics)
Allpro 5.5" lift, 56" long springs and hangers (gave about 4" of lift on this heavy, late-model Runner)
Welded on some additional 1.5" blocks at time of SAS, as seen in this pic.
Cutting off all the coil brackets was a lot more work than cutting off the IFS brackets.
|Rear axle perch beef
SAS- Spring 2003
62" wide Chevy D44, knuckles turned 12 degrees
2" drop front hanger
Allpro 4" springs
Sky Manufacturing steering arm and pitman adapter
Rockstomper Rock Rod tie rod and drag link
Passenger's side steering knuckle machined, drilled, & tapped by Parts Mike.
Also included- converting factory A/C to on-board-air
1-1/4" Chevy Brake Master Cylinder Upgrade
|Welding ujoint caps
||Shackle plate bender
|Ford shock tower
|New rear bumper
Back to Erik's pic's page
Back to Erik's home page